Fujitsu MHY2160BS, MHY2200BS, MHY2120BS, MHY2040BS manual Execution example of Read Multiple command

Interface

Host

Reg. HD

PIO Setup

Data Block

(4 sectors)

PIO Setup
		Block
	Data
(4 sectors)

PIO Setup
		Partial
	Data (1sector)
		Block

Device

Figure 5.12 Execution example of READ MULTIPLE command

•Error reporting conditions

(1)A specified address exceeds the range where read operations are allowed (ST = 51h, ER = 10h).

(2)The range where read operations are allowed will be exceeded by an address during a read operation (ST = 51h, ER = 10h).

(3)An uncorrectable disk read error occurred (ST = 51h, ER = 40h).

(4)The sync byte indicating the beginning of a sector was not found (ST = 51h, ER = 01h).

(5)The READ MULTIPLE command is disabled (ST = 51h, ER = 04h).

(6)A SATA communication error occurred (ST = 51h, ER = 0Ch).

(7)An error other than the above errors occurred (ST = 51h, ER = 04h).

5-90 C141-E269