Fujitsu MHY2200BS, MHY2160BS, MHY2120BS, MHY2040BS, MHY2080BS, MHY2060BS manual Device Specifications

1.2 Device Specifications

1.2 Device Specifications

1.2.1 Specifications summary

Table 1.1 shows the specifications of the disk drives.

Table 1.1 Specifications (1/2)

		MHY2200BS	MHY2160BS	MHY2120BS	MHY2100BS	MHY2080BS	MHY2060BS	MHY2040BS
Format Capacity (*1, *2)		200 GB	160 GB	120 GB	100 GB	80 GB	60 GB	40 GB
Number of Sectors (User)		390,721,968	312, 581, 808	234,441,648	195,371,568	156,301,488	117,210,240	78,140,160
Bytes per Sector					512 bytes
Rotational Speed				5,400 rpm ± 1%
Average Latency					5.56 ms
Positioning time (read and
seek)					1.5 ms (typ.)
• Minimum (Track-Track)
				Read: 12.0 ms (typ.)
•	Average				22 ms (typ.)
•	Maximum (Full)
Start time					4.0 sec (typ.)
Interface			Compliant with ATA-8 ACS, Serial ATA Revision 2.5 Gen1i
Data Transfer Rate (*3)
•	To/From Media			81.3 MB/s Max.
•	To/From Host			1.5 Gbps (150 MB/s) (Gen1i)
Data Buffer Size (*4)				8 MB (8,388,608 bytes)
Physical Dimensions				9.5 mm ⋅ 100.0 mm ⋅ 70.0 mm (*5)
(Height ⋅ Width ⋅ Depth)
Weight					101 g (Max.)

*1: Capacity under the LBA mode.

*2: One gigabyte (GB) = one billion bytes and One megabyte (MB) = one million bytes; accessible capacity will be less and actual capacity depends on the operating environment and formatting.

*3: 1 GB is equal to 1,000,000,000 bytes and 1 MB is equal to 1,000,000 bytes.

*4: 1 MB is equal to 1,048,576 bytes; the actual buffer capacity for data transfer will be less. Refer to the Section 6.4 of this manual.

*5: The value of Depth (=100.0 mm) does not include PCBA (Printed Circuit Board Assembly). For details, see Section 3.1.

Table 1.1 lists the formatted capacity, number of logical cylinders, number of heads, and number of sectors of every model for which the CHS mode has been selected using the BIOS setup utility on the host.

C141-E269 1-5