Fujitsu MHY2200BS, MHY2160BS, MHY2120BS Outline of the frame information structure FIS, FIS types

Interface

5.2.3 Outline of the frame information structure (FIS)

The transport layer converts data written in a Block Register into the FIS, and sends it to the upper layer.

The FIS, which is generated in the transport layer, is explained below.

5.2.3.1 FIS types

The types of FIS are as follows (Each FIS is referred to as abbreviation in square brackets in this manual.):

•Register- Host to Device [RegHD]

•Register- Device to Host [RegDH]

•DMA Active – Device to Host [DMA Active]

•DMA Setup – Device to Host or Host to Device (Bidirectional) [DMA Setup]

•Set Device Bits – Device to Host [SetDB]

•BIST Active – Bidirectional [BIST Active]

•PIO Setup – Device to Host [PIO Setup]

•Data – Host to Device or Device to Host (Bidirectional) [DATA]

5-14 C141-E269