7.3APS compatible command set (optional)
7.3.1 Escape sequences, overview.
GS / n | Set printing speed / Maximum peak current |
GS D n | Set print Intensity |
ESC v | Send printer status |
ESC I | Send printer identity |
ESC @ | Resets printer |
ESC S | Puts the printer in sleep mode |
GS B n | Serial Communication setting |
GS b n | Set parallel port Busy line hold time |
ESC % n | Select internal Character Set |
ESC R n | Select international character Set |
ESC 3 n | Set line spacing |
ESC SP n | Set character spacing |
ESC ! n | Set print mode |
ESC { n | Set/reset Rotated character |
LF | Line feed |
CR | Carriage return |
ESC J n | Feed paper (n dot lines) forward |
ESC j n | Feed paper (n dot lines) backward |
CAN | Cancel print data buffer (text mode) |
ESC * n1 n2 n3 n4 n5 n6, data | Print graphics |
ESC $ n1,n2 | Horizontal dot positioning |
ESC V n1,n2,n3 data | Horizontal bit image |
ESC m | Partial cut |
ESC i | Full cut |
GS k n [Start] <data> NUL | Print bar code |
GS h n | Barcode Height |
GS w n | Barcode magnification |
GS H n | Text position in Barcode |
GS L n | Set Mark length |
GS T n Se | Set TOF position |
GS E | TOF feed paper |
GS X n1 n2 | Set Mark to Cut Position |
GS x n1 n2 | Set Cut Line to Head Dot line Length |
GS / n
Description: Set printing speed / Maximum peak current/
Dynamic division
