Fujitsu PRN608-S user manual General Serial communication, USB communication, Irda communication

PRN608-S

3Function

3.1General

Notice, when data is sent from the external equipment to the printer controller, all data has to be sent as binary file. If data is being sent as a character file, and some data in the file is equal to EOF, the rest will not be received.

3.2Serial communication.

Standard communication is; Baud rate; 115.200 Baud Data bits = 8

Stop bits = 1. Parity = None

Flow control = Hardware handshake

Baud rate can be changed by a software command or by entering setting mode..

3.3USB communication.

Build in USB interface is 100% compliant to USB 1.1 and fully approved by the USB organisation. For more details please contact I/F-COM.

By plug USB cable - Host system will recognise I/F-COM interface board.

Before connecting USB cable please set USB port as offline. Interface board will automatically online USB port. Data cannot be send from interface board to host. USB is not a bi-directional communication.

3.4IRDA communication.

PRN608-S is prepared for IRDA via connector for IRDA transmission. Please contact I/F-COM for more information.

28-03-2003 Page 3-17 of 53