3.8I/F-COM simple command set.
The following commands are use when communicating with the printer controller. All other commands is ignored
3.8.1 | Small Font |
|
|
| [Name] | Small Font (8x12) | |
| [Format] | ASCII | NUL |
|
| Hex | 00 |
|
| Decimal | 0 |
| [Description] | Chooses small font from the current print position. | |
3.8.2 | Low Font |
|
|
| [Name] | Low Font (16x12) | |
| [Format] | ASCII | SOH |
|
| Hex | 01 |
|
| Decimal | 1 |
| [Description] | Chooses low font from the current print position. | |
3.8.3 | Narrow Font |
|
|
| [Name] | Narrow Font (8x28) | |
| [Format] | ASCII | STX |
|
| Hex | 02 |
|
| Decimal | 2 |
| [Description] | Chooses narrow font from the current print position. | |
3.8.4 | Normal Font |
|
|
| [Name] | Normal Font (16x28) | |
| [Format] | ASCII | ETX |
|
| Hex | 03 |
|
| Decimal | 3 |
| [Description] | Chooses normal font from the current print position. | |
|
| This is the default font after power up or reset. | |
3.8.5 | Wide Font |
|
|
| [Name] | Wide Font (32x28) | |
| [Format] | ASCII | EOT |
|
| Hex | 04 |
|
| Decimal | 4 |
