Fujitsu PRN608-S user manual Ascii ESC Z

							PRN608-S
[Description]	When the printer controller receives this byte the digital
	value of the head temperature will be transmitted. This
	command can be treated even if buffer is full
3.8.25 Sub command set
[Name]	Sub command set
[Format]	ASCII		ESC n
	Hex		1B	n
	Decimal		27	n
[Range]	n: [-128;127]
[Description]	The n is the commands in the sub-set.
3.8.26 Upgrade command
[Name]	Upgrade command
[Format]	ASCII	ESC Z
	Hex	1B	5A
	Decimal	27	90
[Description]	Only used by the I/F-COM A/S upgrade programs.
3.8.27 Set auxiliary output
[Name]			Set auxiliary output
[Format]			ASCII		ESC p		n
			Hex		1B	70	n
			Decimal		27	112	n
[Description]			When this command is received then
			the auxiliary output can be set.
			If n = 0, then the output will be set to off
			If n > 1 and < 254 then the output will
			be turned on in n/4.096msec, and then
			turned off again.
			If n = 255, then the output will be turned
			on.
3.8.28 Automatic sending status
[Name]		Automatic sending status
[Format]		ASCII		ESC a
		Hex		1B	61
		Decimal		27	97
[Description]		When this command is sent once, then the
		board will transmit the status every time that
		it change state.

28-03-2003 Page 3-26 of 53