Fujitsu PRN608-S user manual Change dot size Name Format

				PRN608-S
3.8.33 Change dot size
[Name]	Change dot size
[Format]	ASCII	ESC f		n
	Hex	1B	66	n
	Decimal	27	102	n
[Description]	If n = 0x01, then the board is set to
	FTP628MCLxxx.
	If n = 0x02 then is it set to FTP638MCLxxx.
	The value is saved to flash,
3.8.34 Change form feed length
[Name]	Change form feed length
[Format]	ASCII	ESC g		n
	Hex	1B	67	n
	Decimal	27	103	n
[Description]	N represents the value in mm that is form
	feeded after the feed command is sent. The
	value is saved to flash.
3.8.35 Change baud rate
[Name]	Change baud rate
[Format]	ASCII	ESC h		n
	Hex	1B	68	n
	Decimal	27	104	n
[Description]	N represents the new baud rate, legal values
	for n = 1 to 255. The baud rate is calculated
	as 921600/n = new baud rate.
	For instance 921600/8 = 115200baud.
	The value is saved to the flash
3.8.36 Change form feed time
[Name]	Change form feed time
[Format]	ASCII	ESC i		n
	Hex	1B	69	n
	Decimal	27	105	n
[Description]	N represents the time between that the
	board registry incoming paper, and to it
	starts feed the auto form feed length. The
	time is calculated as n * 50msec. The default
	setting is 2 seconds. The value is saved to

flash. Legal values for n are between 1 and 255.

28-03-2003 Page 3-28 of 53