Fujitsu user manual PRN608-S Feed Paper Name Format

PRN608-S

3.8.37 Feed Paper
[Name]	Feed Paper
[Format]	ASCII	GS	n
	Hex	1D	n
	Decimal	29	n
[Range]	n: [-128;127]
[Description]	When the printer controller receives this command the
	paper will be fed n-dot lines. If the value is negative a
	reverse form feed will be made.
3.8.38 Compensate Burn time
[Name]	Compensate burn time
[Format]	ASCII	RS	n
	Hex	1E	n
	Decimal	30	n
[Range]	n: [-15;15]
[Description]	When the printer controller receives this command the
	burn time will be compensated. If a negative value is

send the printout intensity will be lighter and if a positive value is send the printout intensity will be darker.

3.8.39 Bar code width setting
[Name]	Bar code width setting
[Format]	ASCII		ESC e m
	Hex	1B	65	m
	Decimal	27	101	m
[Range]	2<=m
[Default]	m=6
[Description]	Parameter n is ignored

Parameter m is used to determine the dot width of the narrow and wide bar lines. The wide bar lines is equal to m dots and the narrow is equal to m/2 dots (rounded down).

28-03-2003 Page 3-29 of 53