Fujitsu PRN608-S user manual Upca, EAN13, EAN8

PRN608-S

3.8.40 Bar code height setting.

	[Name]		Bar code height setting
	[Format]		ASCII	ESC h		n
			Hex	1B	68	n
			Decimal	27	104	n
	[Range]		1<=n<=255
	[Default]		n=60
	[Description]		Parameter n specifies the height of a bar code in dots.
3.8.41 Bar code printing
	[Name]		Bar code printing
	[Format]		ASCII	ESC k		m	n	d1 to dn
			Hex	1B	6B	m	n	d1 to dn
			Decimal	27	107	m	n	d1 to dn
	[Description]		Parameter m specifies the type of bar codes to be
	printed.
			Parameter n specifies no of barcode characters.
	m(dec)	Type of		Number of		Value of d
		Barcode		barcode
				characters
	65	UPCA		11<=n<=12		48<=d<=57
	67	EAN13		12<=n<=13		48<=d<=57
	68	EAN8		7<=n<=8		48<=d<=57
	69	Code39		Variable		Space , $ , % , * , + , - , . , / , 0-9 ,
						A-Z
	72	Code128		Variable		0 to 105

UPCA: if n is 11 then the board calculate the checksum

EAN8: if n is 7 then the board calculate the checksum.

EAN13: if n is 12 then the board calculate the

checksum

Code 39: The first and last character must be ‘*’. This is the syntax for Code 39.

Code128. There is three subset of Code128 (Code128A, Code128B and Code128C). The start character specifies which character set to be used. The start character must be either 103 (subset A), 104 (subset B), 105 (subset C).

28-03-2003 Page 3-30 of 53