4.1 Using ScanSnap Manager

■Scanning only one side of a document

As the default setting, pressing the [SCAN] button on ScanSnap scanner starts scanning docu-

ments in "Duplex" mode. If you wish to use "Simplex" scanning by pressing the [SCAN] button, change the settings by following the procedure below.

Operation

1. Right-click the "ScanSnap Manager" icon S on the task bar and select "Settings" from the menu.

2.Click the [Scanning] tab and select "Simplex scan" from the "Scanning side" drop- down menu.

4

needs your to according settings Various

3.Click the [OK] button to save changes and close the window.

4.Load the document onto the scanner.

5.Press the [SCAN] button .

ScanSnap S500 Operator's Guide

 

93