3)Firmly holding the document with both hands and bend back the document as fol- lows so that the bent section rises up in the middle of the document.

4)Repeat steps 1) to 3) a few times.

5)Turn the document staple 90 degrees, hold the other two sides of the document, and fan it again.

2.Load the document onto the paper chute.

Load the document so that the top side of the two-sided document (in the case of two or more document sheets, the first page) faces towards the paper chute.

Reduce the quantity of the documents, when the thickness of stack exceeds the reference marks on the side guides.

 

12

 

 

 

 

 

 

34

 

 

 

 

 

 

56

 

 

 

 

 

 

78

 

A

 

 

 

 

90

 

B

 

 

 

 

 

C

 

 

 

 

 

 

D

 

 

 

 

 

E

 

 

 

 

 

F

Reference

 

 

 

 

G

 

 

 

 

 

Paper chute

mark

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Side guide

ATTENTION

If the checkbox for [Set the documents with its face up] of [Scanning] - [Options] in the "Scan and Save Set- tings" window of ScanSnap Manager is selected, set the front of the document with the top edge face-up.

ABCDE

 

F

1234

G

567890

 

40