Operation
1. Load the business cards onto the scanner.
•Load the business cards face down.
•When you scan two or more business card, set them in piles.
•Adjust the side guides so that they contact both sides of the business cards. If there is a space between the business cards and the side guides, place the cards along the left side guide.
Paper chute
Business card
Side guide
[SCAN] button
2.Press the [SCAN] button 
on the scanner.
⇒Scanning will be started. After the scanning has finished, the "CardMinder" screen is displayed.
ATTENTION
•Do not connect or disconnect other USB devices during the scanning operation.
•Do not close the paper chute or press the [POWER] button on the scanner during the scanning operation.
•Do not switch the user to log in during the scanning operation.
HINT
•As the default setting, documents are scanned at "Duplex" mode when you press the [SCAN] button. Using "ScanSnap Manager", you can set the scanner to scan documents in "Simplex" mode by pressing [SCAN] button.
• You can also start scanning with the "ScanSnap Manager" icon S on the task bar.
*For details, refer to "3.4 Changing Scan Settings" (on page 53).
122