123
PRIMERGY TX200 S2 User’s Guide
4
Manual OS Installation
2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created from the
ServerStart CD-ROM and press the [Enter] key.
The following message appears.
3. Select the item appropriate for the card used in the server and press the [Enter]
key.
• For a RAID card
• For an onboard SCSI controller card
4. Follow instructions in the window to perform installation.
When a message prompting you to insert a floppy disk appears, insert the proper
driver disk and press the [Enter] key.
Repeat these procedures to install a driver for another card.
5Follow the instructions from the setup program to continue the installation

procedures.

Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts.
Wait until it restarts automatically.
6Install the chipset driver.
1. Insert the ServerStart CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive] :\DRIVERS\ChipSet\Intel\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
4. When the "InstallShield(R) wizard has completed." message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
7Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" (pg.127).
You have chosen to configure a SCSI Adapter for use
with Windows 2000, using a device support disk
provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following
list, or press ESC to return to the previous screen.
LSI MEGARAID Products for Windows 2000
LSI Logic PCI SCSI/FC MPI Miniport Driver