141
PRIMERGY TX200 S2 User’s Guide
5
Operations after OS Installation
■Paging File Setting
Set up the paging file according to the following procedures:
1Log on to the server with administrator privileges.
2Check free space of the drive where the system is installed.
Check the required amount of free space according to "■ Checking Hard Disk Free Space"
(pg.138). If the drive has no free space, refer to "■ Cannot Collect the Memory Dump"
(pg.277).
3Click [Start] → [Settings] → [Control Panel].
4Double-click the [System] icon.
The [System Properties] window appears.
5Click the [Advanced] tab and click [Performance Options].
The [Performance Options] window appears.