29
PRIMERGY TX200 S2 User’s Guide
1
Overview
1.3.4 Baseboard
aParallel port
A parallel port cable is plugged in when an optional parallel port is used.
bMemory slot
Contains memory. One memory bank consists of Slots A and B in this server. Be sure to install a
pair of memory modules.
cSwitch block
For details about switch settings, refer to "8.1 Switch Settings" (pg.230).
dCPU Socket 0/CPU Socket 1
Install the CPU. The upper is CPU Socket 0 and the lower is CPU Socket 1 in the above figure.
eSecondary IDE port
An IDE cable of the CD-ROM drive is plugged in.
fFloppy disk drive port
A floppy disk drive cable is plugged in.
gPrimary IDE port
This server does not use this port.
hSCSI port A
An internal hard disk unit is plugged in.
iSCSI port B
An internal hard disk unit or a 5-inch internal SCSI device is plugged in.
a cbd
e
f
g
ih
ljk