217
PRIMERGY TX200 S2 User’s Guide
Installing hardware options
7
7.7.3 How to Install the 5-inch Internal Device
Perform the following procedures to install a 5-inch internal device. When installing the internal hard
disk unit conversion kit the procedures vary. Refer to"7.7.4 How to Install the Internal Hard Disk Unit
Bay Conversion Kit" (pg.220).
1Set SCSI IDs of the 5-inch internal devices.
For SCSI IDs of devices, refer to "■ Installable 5-inch Internal Devices" (pg.215).
2Turn off the server and connected devices, and unplug all power cables from
the outlet.
3Remove the side and front covers.
"7.2 Removing and Attaching Covers" (pg.176)
4Touch a metal part of the server to discharge static electricity.
Baseboard
Bay3
Bay2
Bay6
Bay5
Bay4
Bay3
Bay2
Bay1
SCSI Ctrl U160(PG-128)
Secondary
IDE connector
SCSI connector
B
SCSI connector
A
Terminal resistor

[SCSI Ctrl U160(PG-128)]