247
PRIMERGY TX200 S2 User’s Guide
8
Configuring Hardware and utilities
8.2.12Server Menu

The [Server] menu sets the server options.

table: Items on the Server Menu
Item Setting Description
O/S Boot Time out • Disabled (at the tim e of
purchase)
• Enabled
Sets whether to enable or disable the OS Boot
Monitoring function, when ServerView is installed to
the OS. When this function is enabled, if for some
reason booting the operating system is interrupted,
the system will automatically restart.
The OS Boot Monitoring function can also be
enabled or disabled from ServerView.
Note:
If ServerView is not installed to the OS, be
sure to set to [Disabled]. If the setting is
enabled, the server may automatically turn off
or restart improperly.
Even when ServerView is installed to the OS,
if starting the system while the ServerStart
CD-ROM or DOS floppy disk is inside, be sure
to disable the OS Boot Monitoring function. If
the system is started with this function
enabled, the server may automatically turn off
or restart improperly.
When setting this function, refer to
"ServerView User’s Guide" to fully learn about
its specifications, in order to use it properly
with the correct settings.
Action • Continue
• Reset (at the time of
purchase)
•Power Cycle
Sets the operation when the OS did not boot
successfully within the time set with the [Timeout
Value] setting.
Timeout Value • 0 (at the tim e of purchase)
• 1–100
Sets the timeout period in minutes.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
O/S Boot Timeout:
Action:
Timeout Value:
ASR&R Boot Delay:
Power Cycle Delay:
Boot Retry Counter:
Diagnostic System:
Temperature Monitoring:
Memory Scrubbing:
CPU Status
Memory Status
Console Redirection
RomPilot
>
>
>
>
[Disabled]
[Reset]
[0]
[2]
[5]
[3]
[Disabled]
[Disabled]
[Enabled]