22
Chapter 1 Overview
1.3 Component Names and Functions

This section explains the component names and functions of the server and

baseboard.

1.3.1 Server (Front View)

aDrive cover key

When the drive cover key is locked, the drive cover cannot be slid. We recommend you lock it to
prevent unauthorized access to the inside of the server.

bSystem identification LED

This LED is used for maintenance. When pressing the system identification LED button, the
front and rear LEDs are lit blue so that the locations of devices being maintained can be
determined.
Also, the [System Identification LED Display] button of ServerView can be used to light them.

cSystem identification LED button

When pressing this button, the front and rear system identification LEDs are lit blue so that the
locations of devices being maintained can be determined.

dReset switch

Pressing this switch resets and restarts the system.
Do not restart the system when the hard disk access LED is blinking.
Data in the hard disk may be damaged.
abcdefgh
k
l
m
n
i
j
q
r
o
p
Drive cover
Pull the drive cover
down to the lower
end of the server.