67
PRIMERGY TX200 S2 User’s Guide
3
OS Installation Using ServerStart

Add a partition

1. Click [ADD].
The [Disk Configuration] window appears.
2. Set items and click [continue].
The new partition is added to the partition list.

Remove a partition

1. Select the partition to remove and click [REMOVE].
The partition is removed.

Modify the partition configuration

1. Select the partition to modify and click [MODIFY].
The [Disk Configuration] window appears.
2. Change items and click [continue].
The partition is modified.
3Click [leave wizard] after settings are completed.
The disk wizard closes.
If you are in guided mode and want to start up the disk wizard again after exiting the wizard, save the
configuration file.
ServerStart may restart when the disk wizard restarts. If this occurs, open the configuration file you
have saved and start setting from the item where you have discontinued. If the configuration file is not
saved, the settings are lost. Start setting again from the beginning.