Getting started

Calibrating the screen

The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC reacts correctly when touched with the pen, you will be asked to calibrate the touchscreen after the initial start-up.

Touch the centre of the cross hairs that appear on the display with the stylus.

You will need to repeat this procedure several times, whereby the cross hairs will appear at different locations on the display each time.

Follow the instructions on the display.

Entering a PIN (optional)

If you are using a SIM card you will be asked to enter your PIN once the calibration process is finished.

Enter your PIN.

Familiarising yourself with basic operation of the device

Next, the operating system provides a brief introduction to the operation of the Pocket PC with the pen after the initial start-up.

Follow the instructions on the display.

Today screen

Following the introduction the Today screen appears. The Today screen shows all important current information at a glance. From this screen you have access to all programs and to the system settings.

i

Please also use the help function available on your Pocket PC if you want to know more

about using the programs contained in the operating system.

24

A26391-K182-Z120-1-7619, edition 1

Page 34
Image 34
Fujitsu Siemens Computers Loox T manual Calibrating the screen, Entering a PIN optional, Today screen