Energy saving functions
The Pocket PC uses less power when the energy saving functions are enabled. This means you can work with the Pocket PC for longer before having to recharge the battery.
General information on energy management
The battery operating time is considerably dependent on the applications used. Please note that a particularly large amount of energy is required to play sound files or make sound recordings.
Data exchange with a computer also consumes additional battery power. Therefore, always connect your Pocket PC to an electrical outlet during data exchange if possible.
Using energy saving functions
You can save energy in several ways to optimally utilise the battery operating time:
Configuring standby mode
►Under Start – Settings – System – Power, select the number of minutes after which the Pocket PC is to switch into the standby mode when it is not used.
After the specified time has passed, the Pocket PC will automatically bet set to standby mode.
i | Press the End key to end standby mode. |
The Pocket PC returns to the point at which you interrupted your work. |
Switching off display lighting
►Under Start – Settings – System – Display lighting, select the number of minutes after which the display lighting is to be switched off in the battery mode when the Pocket PC is not used.
85 |
