Furuno GP-1650DF Creating Track-based Routes, Removing route waypoints from the plotter display

Removing route waypoints from the plotter display

1.Press the [WPT/RTE] key followed by the soft key ROUTES to open the route menu.

2.Press ▲ or ▼ to select the route desired.

3.Press the soft key EDIT ROUTE.

4.Press the soft key PLOT to show the plot screen.

5.Operate the cursor pad to place the cur- sor on the waypoint you want to remove from the route.

6.Press the soft key REMOVE WPT.

7.4Creating Track-based Routes

You can create routes based on your ship’s track by entering waypoints at own ship’s position. This feature is useful when you wish to retrace a track.

1.Press the [WPT/RTE] key to open the waypoint & route menu.

2.Press the soft key CREATE VOYAGE BASED ROUTE to show the save route menu.

ABCDEF			LENGTH	SAVE
			25.6 nm	ROUTE
ABCDEFGHIJKL			WAYPOINTS
			35	NEW
BRIDGE			LENGTH
			56.7 nm	SELECT
12:30	29SE97		WAYPOINTS
				ROUTE
			6
FISH01			LENGTH
			21.1 nm
15:21 01OCT97			WAYPOINTS
			3
HPT001			LENGTH
			4.7 nm
16:45 01OCT97			WAYPOINTS
			1	RETURN
DGPS 3D		SEARCH FOR _ _ _		RETURN

Figure 7-6 Save route menu

3.Press the soft key NEW to show the new route window.

Next consecutive route number

	SAVE
ROUTE NAME	ROUTE
0 0 6	START
	LOG
COMMENT

DGPS 3D CANCEL

Figure 7-7 New route window

4.If required, you may change the route name and enter a comment, using the [CLEAR] key, cursor pad and alphanu- meric keys.

5.Press the soft key START LOG to show the track-based route screen. If you en- tered an existing route name at step 4, you are asked if you want to add track- based waypoints to the existing route. Then, press the [ENTER] key to select YES, or the [CLEAR] key to escape.

ROUTE NAME: XYZ	SAVE
COMMENT: BEST FISHING	ROUTE

01	LEG
	FINISH
	LOG
02
03
04
	COORD
05	TYPE
	RETURN
DGPS 3D	RETURN

Figure 7-8 Route contents display

6.Press the [PLOT] key to show the plot dis- play. The SAVE icon appears at the bot- tom of the screen.

7-4