Furuno GP-1650DF, GP-1650F manual Changing Operation Mode, Navigation Trip Distance, Fishing

3.9Changing Operation Mode

Operation mode can be changed between PLEASURE and FISHING. FISHING mode provides mark/line entry on the PLOTTER display. The mark can be entered up to 5000 points together with tracks. The apportion between track and mark memory can be changed at menu. Pressing the [HIDE/ SHOW] key changes the function of soft keys. Holding track, changing track color,and se- lecting color and form of mark/line can be performed by the soft keys directly.

1.Press the [MENU] key and the soft key DISPLAY OPTIONS. The display setup1 menu appears.

			DISPLAY
	RNG & BRG MODE	RHUMB LINE
			SETUP1
	RANGE/SPEED UNIT	nm / kt
	DEPTH UNIT	ft
			EDIT
	TEMP UNIT	° F
	LAT/LON DISPLAY	DD° MM.MMM'
	TIME DISPLAY	24 HOUR
	WAYPOINTS SW	AUTO2
	COURSE VECTOR	LINE
	BEARING	MAGNETIC
	MAG VARIATION	AUTO 01.3° E
	TD DISPLAY	LORAN C
	POSITION DISPLAY	LAT/LON
	SET GO TO METHOD	1 POINT	NEXT
	sOPERATION MODE	PLEASURE	PAGE
DGPS 3D			RETURN

Fifure 3-16 Display setup1 menu

2.Press ▼ to select OPERATION MODE.

3.Press the soft key EDIT to show the OP- ERATION MODE window.

OPERATION MODE

▲

'PLEASURE

™FISHING

▼

Figure 3-17 OPERATION MODE window

4.Press ▲ or ▼ to select PLEASURE or

FISHING.

5.Press the soft key ENTER or the [ENTER] key to finish.

3.10 Navigation Trip Distance

The navigation trip distance is displayed at the navigation data display. Press the [PLOT] key several times to show the navigation data display.

			Trip
DATE: OCT 21 2000			TIME 23:59:59	LAT/LON
POSITION			TRIP: 4792 nm
34°	56.789' N LONLAT
135°	56.789' E
SPD			RNG	TD
12.5	kt		123.25 nm
CSE			BRG	ZOOM
359.9°			299.9°
DATUM: WGS-84				SAT
				INFO
TMP 65.8° F		DEP 20.8ft		BEACON
DGPS 3D				INFO

Figure 3-18 Navigation data display

Note: When you enlarge POSITION, TRIP is not displayed.

You can reset the trip distance as follows.

1.Press the [MENU] key followed by the soft keys CONFIGURATION and SYS-

TEM MENU.

2.Press the soft key MEMORY/TRIP CLEAR to open the clear memory menu.

CLEAR PLOTTER MEMORY NO		CLEAR
		MEMORY
CLEAR GPS MEMORY	NO	EDIT
CLEAR ALL MEMORY	NO
TRIP METER RESET	NO

DGPS 3D
	RETURN

Figure 3-19 Clear memory menu

3.Press ￿ to select TRIP METER RESET.

4.Press the soft key EDIT.

5.Press ￿ to select YES.

6.Press the soft key ENTER or the [ENTER] key to clear memory selected.

3-8