Furuno GP-1650F, GP-1650DF manual Following a Route, Navigate route waypoints in reverse order

8. If you selected PORT in step 7, use the

cursor pad to select a port and press the

WPT FISH	FROM	1.3 nm	GO TO
	OS	208.5°
			ROUTE

[ENTER] key. Make a route using the soft

keys and press the [ENTER] key. (If you

want to go directly to that port, simply

press the soft key ADD QP followed by

the [ENTER] key.)

If you selected NEAR SERVICE in step 7, select service mark desired and then press the soft key ENTER. Then, the dis- play shows the locations of those services

WP-002

WP-001

DGPS 3D

FISH

CRAB

ZOOM

IN

ZOOM OUT

GO TO WPT

RVSE ROUTE

RETURN

nearest you. (Figure 8-5 shows location of filling stations in an area in southern Italy.) Use ▲ or ▼ to place the “hand cur- sor” on the port service icon desired and press the soft key ENTER. Make a route using the soft keys and press the [EN- TER] key. (If you want to go directly to location selected, simply press the soft key ADD QP followed by the [ENTER] key.)

				GO TO
+	40° 45.971’N	FROM	0.26 nm
	13° 57.462’E	OS	180.2°

PUNTA CORNACCHIA
ACCO AMENO	ENTER

ISCHIA PORTO

CASAMICCIOLA
I. ISCHIA	CANCEL
DGPS 3D	GO TO

Figure 8-5 Sample filling station locations

(southern Italy)

8.4Following a Route

1.Press the [WPT/RTE] key followed by the soft key ROUTE to open the route list.

2.Press ▲ or ▼ to select a route.

3.Press the soft key GO TO to show the plotter display.

Figure 8-6 Plotter display, route

selected as destination

The cursor is on the route waypoint nearest own ship.

4.Operate the cursor pad to place the cur- sor on the waypoint or leg desired in the route.

5.Press the software key GO TO WPT or FOLLOW LEG (depanding on the choice at step 4).

Green lines connect all route waypoints and arrows on the lines point in the direction to traverse the route.

Navigate route waypoints in reverse order

Press the soft key RVSE ROUTE to reverse the order to traverse waypoints. The arrows on the route line point in direction selected.

Navigate directly to a route waypoint

If you want to go directly to a route waypoint, place the cursor on the waypoint to show the flashing diamond, and then press the soft key

GO TO WPT.

Navigate along specific leg of route

Place the cursor on the leg to display it in a white and red flashing line, and then press the soft key FOLLOW LEG.

8-3