Furuno GP-1650F, GP-1650DF manual Demonstration Display, Demo setting screen

1.8Demonstration Display

The demonstration display provides simu- lated operation of this unit. On the plotter dis- play, own ship tracks, at the speed selected, a figure eight course or any course you en- ter, starting from position entered. All controls are operative; you may set destination, en- ter waypoints, etc. Simulated sounder opera- tion is also provided.

1.Press the [MENU] key, followed by the soft keys CONFIGURATION and SYSTEM MENU to open the system menu.

2.Press the soft key DEMONSTRATION MODE to open the demonstration setting screen.

sDEMO MODE	OFF	DEMO
		MODE
DEMO SPEED	10.0kt
DEMO COURSE	000.0°	EDIT
DEMO START LAT	34°12.34’N
DEMO START LON	135°12.34’E

DGPS 3D
	RETURN

Figure 1-10 Demo setting screen

3.Press ▲ or ▼ to select DEMO MODE.

4.Press the soft key labeled EDIT to show the demo mode window.

DEMO MODE

▲

ON

™OFF

▼

Figure 1-11 Demo mode window

5.Press ▲ to select ON.

6.Press the soft key ENTER or the [ENTER] key.

7.Select DEMO SPEED and press the soft key EDIT. Enter speed. Select digit with t/sand enter appropriate numeric value with numeric key.

8.Select DEMO COURSE and press the soft key EDIT. Select how you want the courseline to be traced; by FIGURE 8 or DIR.(ection). For DIR., enter course.

9.Select DEMO START LAT., and press the soft key EDIT. Enter current latitude.

10.Select DEMO START LONG., and press the soft key EDIT. Enter current longitude.

11.Press the soft key RETURN to finish.

To cancel the demonstration display, set DEMO MODE to OFF.

1-5