Furuno GP-1650DF, GP-1650F manual Configuration menu, 11-10, Setup Nmea Port 1 menu description

11.5 CONFIGURATION menu

The configuration menu has facilities for set- ting up data ports, uploading/downloading data, self test, demonstration mode setup, and memory clearing.

1.Press the [MENU] key.

2.Press the soft key CONFIGURATION to display the configuration menu.

CONFIG

SETUP NMEA PORT 1

SETUP NMEA/DGPS PORT 2

UPLOAD/DOWNLOAD DATA

SYSTEM MENU

DGPS 3D
	RETURN

Figure 11-18 Configuration menu

SETUP NMEA PORT 1 menu description

This menu sets up DATA PORT 1 according to the specifications of the equipment con- nected to it. The menu can be displayed by pressing the [MENU] key followed by the soft keys CONFIGURATION and SETUP NMEA PORT 1. For detailed information, see the Installation Manual.

		SETUP
FORMAT	NMEA0183	PORT 1
s
	Ver2.0
LAT/LON FORMAT DD° MM.MMM’		EDIT

SELECT

SNTNC.

	RETURN
DGPS 3D

Figure 11-19 Setup NMEA port 1 (or 2) menu

FORMAT

Selects NMEA0183 version 1.5 or 2.0. If you are unsure of the version of external equip- ment try both and choose the one which out- puts data correctly. The default setting is version 2.0.

LAT/LON FORMAT (GGA only)

Selects the seconds of latitude and longitude positions in hundredths, thousandths or ten thousandths.

Soft key SELECT SNTNC

This key enables/disables input/output of data sentences.

SETUP NMEA/DGPS PORT 2 menu description

This menu should be set according to the specifications of the equipment connected to connectors PORT 1 (NMEA) and PORT 2 (DGPS) at the rear of the display unit. The menu can be displayed by pressing the [MENU] key followed by the soft keys CON- FIGURATION and SETUP NMEA PORT 2. For detailed information, see the Installation Manual.

FORMAT

Selects data format of connected equipment; NMEA0183 version 1.5, version 2.0, RTCM104 (EXTRN), RTCM104 (INTRN) or RTCM104 (OUTPUT). RTCM104 (INTRN) or RTCM (OUTPUT) is for GP-1850DF only.

LAT/LON FORMAT (GGA only)

This setting can be performed when NMEA0183 Ver. 1.5 or 2.0 is selected at the FORMAT. It displays the seconds of latitude and longitude positions in hundredths, thou- sandths or ten thousandths.

11-10