Furuno GP-1650DF, GP-1650F manual Anchor Watch Alarm, XTE Cross Track Error Alarm

9.4Anchor Watch Alarm

The anchor watch alarm informs you that your boat is moving when it should be at rest. When the anchor watch is active, a red dashed circle marks the anchor watch area.

Alarm setting

Your ship’s position	: Alarm
where you start the
anchor watch alarm.	area

Figure 9-5 How the anchor

watch alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Press ▲ or ▼ to select ANCHOR ALARM.

3.Press the soft key EDIT to open the an- chor alarm window.

ANCHOR ALARM

▲

'ON 0.050nm

™OFF

▼

Figure 9-6 Anchor watch alarm window

4.Press ▲ to select ON.

5.Key in the alarm range desired. The an- chor watch range is 0.001 to 9.999 miles.

6.Press the soft key ENTER or the [ENTER] key to register your selection.

9.5XTE (Cross Track Error) Alarm

The XTE alarm warns you when your boat is off its intended course. When the XTE alarm is active two red dashed lines mark the XTE alarm area.

Own ship’s	Alarm	Destination
		waypoint
	setting
position

: Alarm

Figure 9-7 How the XTE alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Press ▲ or ▼ to select XTE ALARM.

3.Press the soft key EDIT to open the XTE alarm window.

XTE ALARM

▲

'ON 0.100nm

™OFF

▼

Figure 9-8 XTE alarm window

4.Press ▲ or ▼ to select ON.

5.Key in the alarm range desired. The XTE alarm range is 0.001 to 9.999 miles.

6.Press the soft key ENTER or the [ENTER] key to register your selection.

9-2