SAFETY INSTRUCTIONS
Safety Instructions for the Operator
WARNING
Do not open the equipment.
There are no
Do not disassemble or modify the equipment.
Fire, electrical shock or serious injury can result.
Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.
Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.
Do not maneuver the vessel based on the depth indication alone.
Grounding may result.
Use the proper fuse.
Fuse rating is shown on the equipment. Use of a wrong fuse can result in damage to the equipment.
CAUTION
Do no turn on the equipment with the transducer out of water.
The transducer may be damaged.
The picture is not refreshed when picture advancement is stopped.
Maneuvering the vessel in this condition may result in a dangerous situation.
Use the proper gain setting.
Incorrect gain may produce wrong depth indication, possibly resulting in a dangerous situation. See "Adjusting the gain" on page 7 for details.
NOTICE
The high quality LCD shows 99.99% of its pixels. The remaining .01% may drop out or brighten, due to the property of the LCD, however this is not a sign of malfunction.
A warning label is attached to the equip- ment. Do not remove the label. If the label is missing or damaged, contact
a FURUNO agent or dealer.
WARNING | Name: Warning Label (1) | |
Type: | ||
To avoid electrical shock, do not | ||
remove cover. No | Code No.: | |
parts inside. |
|
i
