Water temp/speed sensor
Connect the optional water temp/speed sensor to the XDR connector with the optional converter connector (Type 02S4147) as shown below.
Connect to XDR port at rear of display unit
Input data sentences (con’t)
Sentence | Meaning |
MWV | Wind speed and |
| angle |
RMA | Recommended |
| minimum specific |
| |
RMB | Recommended |
| minimum navigation |
| information |
RMC | Recommended |
| minimum specific |
| GPS/TRANSIT data |
MJ-A6SRMD
Tape connectors with
vulcaninzing tape and then vinyl tape to waterproof them. Bind tape ends with cable ties to prevent
From tape from unraveling. sensor
From transducer
| VHW | Water speed and |
|
| heading |
| VTG | Course over ground |
|
| and ground speed |
| XTE | Cross track error |
| Output data sentences | |
|
|
|
| Sentence | Meaning |
Connection of converter
connector 02S4147
4.8IEC 61162-1 Data Sentences
The tables below show the data sentences which can be input to and output from the
Input data sentences
Sentence | Meaning |
BWC | Bearing and distance to |
| waypoint |
GGA | Global positioning system |
| (GPS) fix data |
GLL | Geographic position - |
| latitude/longitude |
HDG | Heading, deviation and variation |
HDT | Heading, true |
MDA | Atmospheric pressure |
MTW | Water temperature |
DBT (Ver. 1.5) | Depth below |
| transducer |
DPT (Ver. 2.0, Ver. | Depth |
3.0) |
|
MTW* | Water temperature |
RMB* (Ver. 2.0) | Recommended |
| minimum |
| navigation |
| information |
VHW* | Water speed and |
| heading |
TLL* | Target position, |
| output by [MARK] |
| key. |
*= Available with connection of optional sensors/navaid
35
