Operation, Control Description, Power On/Off | Furuno Ls4100

1. OPERATION

1.1 Control Description

Cursor Pad

Selects menu items; shifts VRM.

MENU

MODE

ESC

GAIN

RANGE

MARK

ECHO SOUNDER POWER

LS-4100 BRILL

Selects display mode.

Opens/closes menu; escapes from current operation.

Adjusts gain.

Selects basic display range.

Outputs L/L position to external equipment; registers selected position as waypoint.

Long press: Turns power on/off.

Momentary press: Adjusts display contrast and brilliance.

Display unit

How to remove the hard cover

Place your thumbs at the center of the cover, and then lift the cover while pressing it with your thumbs.

1.2 Power On/Off

Press the [POWER/BRILL] key more than one second to turn on the power. The unit beeps, the startup screen appears, and then the equipment checks the ROM and RAM for proper operation and displays program number. (If “NG” (No Good) appears, try to press any key except the [POWER/BRILL] key to start operation. However, the equipment may not work properly. Contact your dealer.) You may

press any key after the completion of the equipment check to start operation sooner.

1

Image 7

Furuno Ls4100 manual Operation, Control Description, Power On/Off, Display unit, How to remove the hard cover

Contents

Echo Soundr Table of Contents Safety Instructions Safety Instructions for the Installer Iii FeaturesForeword Word to LS-4100 Owners Standard supply System configurationSystem Overview Equipment lists Control Description Power On/OffHow to remove the hard cover Operation Choosing a Display, Frequency Adjusting Display Contrast, BrillianceBrilliance/contrast adjustment window Mode selection window 50 kHz Single frequency displayDual frequency display Marker-zoom display Bottom-zoom display Bottom-zoom displayBottom-lock display Nav data displays Choosing automatic operation Menu Operating ProcedureAutomatic Operation How automatic operation works Gain offset Choosing the manual modeManual Operation Range offset Shifting the range Adjusting the gain Picture advance options window How to measure depth with the VRMMeasuring Depth Choosing Picture Advance Speed Clutter appearance Suppressing InterferenceSuppressing Low Level Noise Forms of interference Scope display Erasing Weak EchoesScope Display Appearance of weak echoes Alarm menu AlarmsAlarm description Activating an alarm Fish level options Depth, temperature, speed setting WindowWaypoints Silencing the buzzer Waypoint data display Registering a waypoint on the screenRegistering waypoint by L/L KHz display Waypoint list Setting destination waypointEditing waypoints Erasing waypoints Nav data display-1 Setting Up Nav Data DisplaysNAV Data Setup window Nav data window and item displayable NAV data display-2 Other Menu ItemsHUE Picture Color Deep Gain How white line works System menus Water temperature display wide, FSystem Menu System Menu Nav window Page MAINTENANCE, Troubleshooting Installation menu TroubleshootingDiagnostics Troubleshooting table Test patterns Memory ClearTest Pattern Clear memory display Display Unit InstallationThru-hull Mount Transducer Suitable transducer mounting locations Thru-hull mount transducer dimensionsTypical thru-hull mount transducer installations Acceptable transducer mounting locations 520-5PWD Installing the 520-5PWD on a flat hullTransom Mount Transducer Transducer preparation Installing the 525-5PWD Installing the transom mount transducer on a deep-V hull525-5PWD Inside-hull Transducer Triducer 525ST-MSD Pre-test for speed and temperatureOptional Triducer Final preparation Mounting location on single drive boat Installation of bracketMounting location Height required at mounting location Sensor position and transom angle Adjusting Cable routing Vertical adjustment and cable routingAttaching the sensor to the bracket Attaching the sensor to the bracket Optional Water Temperature/Speed Sensor Establishing the ground Power connectorOptional equipment Water temp/speed sensor IEC 61162-1 Data Sentences Nmea PORT, Nmea MIX Installation Menu Bottom level display Waas options window Specifications of Echo Sounder LS-4100 Page Page Display Unit 00014698000