2. VIDEO PLOTTER
2.5.2Entering line
You can enter the line similar to mark.
1.Pres the [MARK] key to show ENTER MARK menu.
2.Press the numeric key to select line shape desired.
No.14 through 20 are for line. Shapes of line No.16 through 20 are as below.
No./name 16 NAV LINE
17COAST LINE
18CONTOUR LINE
19PROHIBITED AREAS
20 CABLE
Shape
White line
3.The line is entered at the position selected on the previous page anytime the [ENTER] key is pressed.
Entering independent lines
When you enter the independent line at the new position, do the following steps. Otherwise, the line becomes one.
1.Press the [MARK] key to show ENTER MARK menu.
2.Press the [2], [1] key in order to select LINE CHANGE (item 21).
3.Press the [ENTER] key.
4.Press the numeric key for new line shape.
5.Press the [ENTER] key.
