Furuno RP-25 Recording and Replaying Data, Displaying navigation lines, Internal navigation lines

2. VIDEO PLOTTER

2.8.5Displaying navigation lines

Internal navigation lines

Navigation lines made at the previous section can be displayed as follow.

1.Press the [NAV MENU], [3] key to show NAV LINE menu.

2.Press the [7] key several times to select VIDEO PLOTTER at NAVLINE DATA (item 7) field.

3.Press the [2] key twice to select ON at NAV LINE (item 2) field.

4.Press the [ENTER] key.

5.Press the [3] key to select NAV LINE NO. (item 3).

6.Press the numeric key to enter the number for the navigation line which you want to display.

7.Press the [6] key, and then enter the waypoint number which you go to.

8.Press the [ENTER] key.

External navigation line

The navigation line from the external navigator can be displayed.

1.Press the [NAV MENU], [3] key to show NAV LINE menu.

2.Press the [7] key several times to select NAVIGATION at NAVLINE DATA (item 7) field.

2.9Recording and Replaying Data

2.9.1Formatting memory (RAM) card

Before you can use a memory (RAM) card with the RP-25, the card must be formatted. Formatting prepares the recording surface of the card for use with the system, and deletes all data recorded in the memory card.

Note: You can format cards you’ve used before, however, in which case all prior information on them is erased.

1. Insert the memory card in the right side card slot.

Eject button

for right card drive

Card Drive

Right: RAM card

Left: Chart card

Eject button

for left card drive

Display unit

Card slot

2-26