1. RADAR MAP
1.4Position and bearing correction
1.4.1Radar map correction
When there is an error between the radar screen and marks/lines, do the following procedures.
1.Press the [CHART ALIGN] key.
“MAN ALIGN” appears at the right side of screen.
2.Operate the trackball to align the radar screen and radar map.
3.Press the [CHART ALIGN] key again.
The screen is fixed, and “ MAN ALINED” appears instead of “MAN ALIGN”.
1.4.2Cursor data correction
The above correction value can be added to the cursor position’s L/L data.
1.Press the [NAV MENU] [1] key in order to show the RADAR MAP menu.
2.Press the [4] key twice to select ON at ALIGN CURSOR field. When deleting the correcting value from the cursor data, select OFF.
3.Press the [NAV MENU] key to close the menu.
1.4.3Releasing the radar map correction
1.Press the [NAV MENU] [1] key in order to show the RADAR MAP menu.
2.Pres the [3] key to select NAV DATA POSN.
3.Press the [ENTER] key.
The correction is released and “MAN ALINED” disappears.
4.Press the [NAV MENU] key to close the menu.
