2. VIDEO PLOTTER
11.Press the [ENTER] key.
For example, when you select the navigation line which has waypoints
11→12→13→14, and you are going to waypoint 12, the display shows “(11) →@→12→(13) →(14)”. “@” means the own ship’s position.
12.If you want to be alerted when own ship nears a waypoint, press the [8] key several times to select ON at ARRIVAL ALARM (item 8) field.
13.Press the [ENTER] key.
14.Press the numeric key t enter the arrival alarm range, and then press the [ENTER] key.
15.Press the [9] key several times to set TURNING LINE (item 9). OFF: Turns turning lines off.
ON: Use this setting when vessel is not to correct cross track error to return to course set, after arriving at turning line location.
REVISED: Use this setting when vessel is to return to course set after correcting cross track error, after arriving at turning line location.
No cross track error | Cross track error |
correction at turning line | correction at turning line |
Navigation
line
Turning line
Course
Turning line 
Own ship
Track
TURNING LINE: ON
TURNING LINE: REVISED
16.Press the [ENTER] key.
17.Press the [NAV MENU] key to close the menu.
Note: The turning line function requires the correct settings of TURN RATE and SPEED RATE (on SHIP INFORMATION menu). For details, ask your dealer.
