2. VIDEO PLOTTER
2.6Erasing Marks, Lines
2.6.1Erasing individual marks/lines
1.Select CURSOR at MARK ENTRY MODE on VIDEO PLOTTER 2 menu.
2.Press the [MARK] key to show ENTER MARK menu.
3.Press the [2] key twice to select mark cancel (item 22).
4.Operate the trackball to move the cursor on the mark (starting/ending point of line) which you want to erase.
5.Press the [ENTER] key.
When erasing a line, move the cursor on the starting/erasing point of line. To select the connecting point erases two lines connected to it.
Starting/ending point of line
This line is erased.
Connecting point of lines
These lines are erased.
2.6.2Erasing marks/lines on a area
The following procedure erases all marks and lines within a square which is 20% larger than the effective display area.
1. Press the [NAV MENU] [9] key in order to show ERASE menu.
