Furuno SC-50 manual Safety Instructions

SAFETY INSTRUCTIONS

Safety Instructions for the Operator Safety Instructions for the Installer

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel should work inside the equipment.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.

Continued use can cause fatal damage to the equipment. Contact a FURUNO agent for service.

Do not place liquid-filled containers on the top of the processor unit.

Fire or electrical shock may result if the liquid enters the equipment.

Use the proper fuse.

Use of a wrong fuse can damage the equipment and cause fire.

WARNING

Turn off the power at the switchboard before beginning the installation.

Fire or electrical shock can result if the power is left on.

Do not install the equipment where it may get wet from rain or water splash.

Water in the equipment can cause fire, electrical shock or damage to the equipment.

NOTICE

Observe the following compass safe distances to prevent interference to a magnetic compass:

	Standard	Steering
	Compass	Compass
Display unit	0.5 m	0.3 m
SC-502
Processor unit	1.3 m	0.8 m
SC-501
Antenna unit	0.3 m	0.3 m
SC-303
Antenna unit	0.3 m	0.3 m
SC-603

CAUTION

No one navigation device should ever be solely replied upon for the navigation of a vessel.

Always confirm position against all avail- able aids to navigation (incl. nautical charts), for safety of vessel and crew.

WARNING LABEL

A warning label is attached to the processor unit. Do not remove the label. If the label is missing or damaged, contact a FURUNO agent or dealer about replacement.

WARNING	WARNING LABEL
	Name:	Warning Label (1)
To avoid electrical shock, do not
remove cover. No user-serviceable	Type:	86-003-1011-0
parts inside.

Code No.: 100-236-230

i