Furuno SC-50 manual Provider GEO Satellite Longitude, GEO satellite and coverage area

3. OPERATION

2)Use the Omnipad to choose WAAS satellite search method, AUTO or MANUAL as appropriate. For MANUAL, press the [ENT] key, enter appropriate WAAS satellite referring to the illustration below and then press the [ENT] key.

Provider					GEO Satellite			Longitude
WAAS		POR (134)						178°E
		AOR-W (122)						54°W
EGNOS		AOR-E (120)						15.5°W
		IOR (131)						64.5°E
	118° W				34.75° W 24.5° E 121.25° E
			2°			2°		2°	2°
					122	120		131	134
				AOR-W			AOR-E	IOR		POR
					54° W		15.5° W	64.5° W		178° E

One-degree threshold

Longitude Range	Satellite
120.25° E to 117° W	134
119° W to 33.75° W	122
35.75° W to 25.5° E	120
23.5° E to 122.25° E	131

GEO satellite and coverage area

3)CORRECTIONS DATA SET is selected; press the [ENT] key. CORRECTIONS DATA SET determines how to use the WAAS signal, which is currently in the test mode. Use the default setting (02) until the WAAS system becomes operational, then change the setting to “00.”

6.Choose DPGS STATION and press the [ENT] key.

AUTO

MANUAL

AUTO/MANUAL options

7.Choose MANUAL or AUTO as appropriate and press the [ENT] key. For AUTO got to step 8. For MANUAL do the following:

1)RATE is selected; press the [ENT] key.

50BPS

100BPS

200BPS

Baud rate options

3-17