3.OPERATION
5.Choose SENTENCE and then press the [ENT] key.
|
| DATA OUT1 |
|
|
|
| |
HDT | VTG | VHW | |
HDM | GGA | VBW | |
ROT | GNS | HVE | |
ATT | GLL | ZDA | |
VDR |
|
| |
DATA OUT1 menu, sentences
6.Use the Omnipad to choose the sentence to process and then press the [ENT] key.
HDT: True heading (required for radar, AIS, ECDIS, etc.)
HDM: Magnetic heading (Some boaters may want magnetic heading when the boat is fitted with only a magnetic compass without correction of deviation and variation. HDM is obtained in this equipment by adding the magnetic variation to HDT automatically.)
ROT:
ATT: True heading, pitching, rolling (FURUNO’s proprietary sentence)
VDR: Set and drift
VTG: Course over ground and ground speed
GGA: Global positioning system (GPS) fix data
GNS: GNSS fix data
GLL: Geographic position, latitude/longitude
VHW: Water speed and heading
VBW: | Dual ground/water speed | ||||
HVE: | Pitch and roll data (FURUNO’s proprietary sentence) | ||||
ZDA | Time and date | ||||
|
|
|
|
|
|
|
|
| OFF |
|
|
|
|
| ON |
| |
|
|
|
|
|
|
|
|
|
|
|
|
7.Use the Omnipad to choose OFF or ON as appropriate and then press the [ENT] key. Sentences selected for output are marked with an asterisk.
8.Choose item desired and then press the [ENT] key.
9.Choose ON or OFF as appropriate and then press the [ENT] key.
10.Press the [MENU] key to return to the DATA OUT1 menu.
11.Choose BAUD RATE and then press the [ENT] key.
