3. OPERATION
12.Use the Omnipad to choose the baud rate of the equipment connected and then press the [ENT] key.
13.INTERVAL is selected; press the [ENT] key.
25ms
100ms
200ms
1S
2S
Tx interval options
14.Use the Omnipad to choose appropriate output interval and then press the [ENT] key.
15.Choose IEC VERSION and then press the [ENT] key.
IEC ED1
IEC ED2
NMEA 1.5
IEC, NMEA version options
16.Choose appropriate IEC (or NMEA) edition and then press the [ENT] key.
17.Choose HDG TALKER and then press the [ENT] key.
GP
HE
HN
HC
Heading talker options
18.Choose appropriate heading talker and then press the [ENT] key. If an external gyrocompass is used, choose HC.
GP: GPS navigator
HE:
HN:
HC: Gyrocompass
19.Press the [DISP] key to close the menu, or press the [MENU] key several times to return to the I/O SETUP menu to setup another output port.
