Garland Salamander Broiler service manual Clearance Hole Screws, Step

INSTALLATION Continued

3.Slide the salamander down into the support brackets installed in step 2, see figure 2.. NOTE: On ranges with 2 space saver ovens, the center post must slide into the center channels built into the back of the unit..

4.Once the salamander is in place, fasten it to the unit on both sides of the range with the provided #14B x 5/8 hex washer head tapping screws..

PROVIDED #14B x 5/8 HEX WASHER HEAD TAPPING SCREWS

DETAIL I

ALL 48" RANGES

5.For center support, (detail II) re-insert screws removed in step 1 or provided sheet metal screws as shown in detail II and III, inserting screws for detail III through clearance in back panel..

FOR 48" RANGES WITH

STANDARD OR CONVECTION OVENS

AND STORAGE

INNER

CLEARANCEHOLES HOLE

CLEARANCE HOLE

SCREWS	DETAIL III
REMOVED
IN STEP 1

PROVIDED

SHEET METAL

SCREW

2 SCREWS

REMOVED DETAIL II IN STEP 1

FOR 48" RANGES WITH 2 SPACE SAVER OVENS

INNER

CLEARANCEHOLES HOLE

CLEARANCE HOLE

SCREWS	DETAIL III
REMOVED
IN STEP 1

3 PROVIDED SHEET METAL

SCREWS

2 SCREWS

REMOVED DETAIL II IN STEP 1

6.Re-insert screws removed in step 1 though clearance hole in back panel as shown:

CLEARANCE

HOLE

REMOVED

SCREW

DETAIL IV

ALL 48" RANGES

Part # 4523974 (11/07) Page 11