INSTALLATION Continued
Model UIR60 – 60” Ranges
DETAIL
II
1..Remove screws from back of oven on both sides of the range (detail I) and center (detail II) as shown:
REMOVE |
2 SCREWS |
FROM BOTH SIDES |
DETAIL
I
60" RANGE
Figure 3 – With area detail defined for 60 inch range..
NOTE: Instructions are for mounting the salamander on the
DETAIL I |
|
|
ALL 60" MODELS |
| |
REMOVE | A B |
|
2 SCREWS |
| |
IF REQUIRED |
|
|
| C | D |
REMOVE
2SCREWS IF REQUIRED
right side, for mounting on the left side follow the same directions except use references 1, 2, 3, & 4 (to the left of detail II see below) in lieu of A, B, C, D for detail II in the following steps..
DETAIL
II
1 2 A B
3 | 4 | C D |
DETAIL II
FOR 60" RANGES
WITH STANDARD OVEN
REMOVE |
|
2 SCREWS | A B |
IF REQUIRED |
| REMOVE |
| 2 SCREWS |
C D | IF REQUIRED |
DETAIL II
FOR 60" RANGES
WITH CONVECTION OVEN
Page 12 | Part # 4523974 (11/07) |
