Garland Salamander Broiler service manual Remove, Detail

INSTALLATION Continued

Installation Of A Salamander To A Range

NOTE: The back of the range must be easily accessible..

Model UIR36 – 36” Ranges

DETAIL

I

36" RANGE

Figure 1 – With area detail defined for 36 inch range..

1..Remove screws from back of oven (on both sides of range) as shown:

REMOVE

2 SCREWS (BOTH SIDES)

DETAIL I

2.Install the left and right support brackets (part # 4523226 and 4523227) by re-inserting the 2 screws removed in step 1 and one additional screw (on both sides of the range)..

INSERTED

SCREWS

DETAIL I

3.Slide the salamander down into the support brackets installed in step 2, see figure 1..

4.Once the salamander is in place, fasten it to the unit on both sides of the range with the provided #14B x 5/8 hex washer head tapping screws..

PROVIDED #14B x 5/8 HEX WASHER HEAD TAPPING SCREWS

DETAIL I

Part # 4523974 (11/07) Page