Appendix
Troubleshooting
Problem | Solution/Answer | |
The bezel is not | Unlock the bezel: press enter and quit simultaneously. | |
Press firmly on the bezel for the best results. Tap the | ||
responding to my | ||
outer ring on the bezel, not the inner ring near the watch | ||
taps. | ||
face. Adjust the sensitivity setting (see page 30). | ||
| ||
My Forerunner | Touch and hold GPS. Make sure GPS is set to On. | |
never gets satellite | Take your Forerunner outside and away from tall | |
signals. | buildings. Remain stationary for several minutes. | |
The battery gauge | Allow the Forerunner to fully discharge, and then fully | |
does not seem | ||
charge it (without interrupting the charge cycle). | ||
accurate. | ||
| ||
| Stay 10 m away from other ANT+ accessories while | |
The heart rate | pairing. Bring the Forerunner within range (3 m) of the | |
sensor while pairing. Restart the scan for the accessory | ||
monitor, foot pod, or | ||
(see page 33). Make sure the accessory is sending data | ||
GSC 10 will not pair | (for example, you need to be wearing the heart rate | |
with the Forerunner. | monitor). If the problem persists, replace the battery in | |
| the accessory. | |
The heart rate data | See page 34. | |
is inaccurate. |
| |
The heart rate | A smaller elastic strap is sold separately. Go to | |
monitor strap is too | ||
big. |
|
44 | Forerunner 405 Owner’s Manual |