Magnum 6K25 Managed Fiber Switch

Installation and User Guide (04/06)

Fig 3.5.2d Daughter

Board shown upside down with two male latch connectors

Step 4. Hold the daughter board with both hands at the end and align the two cream color latching

connectors (male) placed at the bottom of the daughter board with

the other female connector placed on the

Granddaughter and main board. As shown below in Fig. 3.5.2e

Fig. 3.5.2e Magnum 6KPM daughter board aligned with the bottom female connector for the installation

Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then press slowly and firmly with two fingers (as shown below in Fig. 3.5.2f) on the top of the latching connectors until the connectors latched up securely.

Figure 3.5.2f: Securely latching up 6KPM Cards into a Magnum 6K25

www . GarrettCom . com

31

Page 38
Image 38
GarrettCom manual 2f Securely latching up 6KPM Cards into a Magnum 6K25