GarrettCom 6K25 manual 1c 6KP4, @10Mb @100Mb Multi-mode FX-ST twist, Lock Module

Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)

5.2.1c 6KP4-				6KP4-RJ10MST,
FLSTFX,
		4 Port@ 10Mb ST Fiber Port
2@10Mb &
2@100Mb				2
multi-mode
FX-ST “twist		ACT			ACT
lock” Module		F/H			F/H	1
The Magnum 6KP4-	3	1	TX	LK RX	5	TX LK RX
		ACT			ACT
FLSTFX is a combo fiber		F/H	TX	LK RX	F/H	LK RX
module with two 10Mb +		2			6 T
		1		LINK	2	ACTIVITY
two 100Mb multi-mode
fiber module and in		3	FULL/HALF
combine 4 ST-Fiber ports.

All four fiber ports are ST connectors and configured as 10Mb Half-duplex by default for 10Mb fiber and 100Mb Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their legacy 10Mb network to the Magnum 6K25 switch. They also provide a convenient way for the half duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST module allow to connect the 100Mb demand of Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a special order).

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).

5.2.2.6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC “snap-in” Fiber connector

The Magnum 6KP6- RJMSC is also a Combo 6 Port module equipped with 4 10/100Mb RJ-45 ports along with 2 multi- mode 100Mbps fiber optic transceivers all in one module. This is similar to the 6K6-RJMST. It has the same LEDs indicating port activity (ACT), Link (LK), and

6KP6-RJMSC,

4 Port@ 10/100Mbps and 2 @100 Mb SC Fiber Port 2

	1	3	5	7	1
	10/100				LK
	F/H				ACT
4	ACT		ACT
	F/H		F/H

	2 TX LK RX	6	TX LK RX	3
1	LINK	2	10/100

3 ACTIVITY 4 FULL/HALF

www . GarrettCom . com

43