GarrettCom manual Rack-mounting, Reverse version of the Magnum 6K25s

Magnum 6K25 Managed Fiber Switch Installation and User Guide (04/06)

3.3.2 Rack-mounting, Reverse version of the Magnum 6K25s

The optional Reverse Magnum 6K25 Model has all of the cabling (Ethernet cabling, power cabling and console port cabling) connectors in the rear, and the status LEDs in the front. The status LEDs that are co-incident with the ports are still present there, and a second or dual set of LEDs are used for status visibility in the front of the unit, showing the same data.

There are three options of brackets available to mount in the standard 19” frame or the 23” frame or ETSI (21”) frame. The 19” brackets are included with each unit, the other two may be purchased if desired.

With each bracket type, there are three different mounting options is shown in Fig. 3.3.2. The case of the Magnum 6K25 has mounting holes prepared for each of the mounting arrangements. Users may choose the mounting arrangement most suitable for their installation.

D		D	C		C	B		B	A	A
D	D	C		C	B		B	A		A

DD CC BB AA

Standard Flush

Mount Bracket

Mid-Range Mount or 5” Set-Back Bracket

Rear Mount Bracket

Fig 3.3.2 Reverse Magnum 6K25 units, rack-mounted in a frame

3.4Powering the Magnum Managed Fiber Switch

The Magnum 6K25 Switches incorporate an internal universal power supply

and have a recessed male IEC connector for the AC power cord at the left-rear. A manual power ON-OFF switch is adjacent. A six-foot 115 VAC 60 Hz standard power cord is supplied with each unit shipped within the United States and Canada.

The auto-ranging power supply supports installation environments where the

www . GarrettCom . com

26