Magnum 6K8-Series Industrial Field Switch | Installation and User Guide (04/07) |
Model #
GBIC-SXSC
GBIC-LXSC10
GBIC-LXSC25
GBIC-TP
GBIC-ZXSC40
GBIC-ZXSC70
GBIC Description
One 1000BASE-SX port with multi-mode SC fiber connector
One 1000BASE-LX/LH port 1310nm single- mode SC 10Km
One 1000BASE-LX/LH port 1310nm single- mode SC 25Km
One IEEE 802.3ab TP port, RJ-45 connector
One 1000BASE-ZX port 1550nm single- mode SC 40Km
One 1000BASE-ZX port 1550nm single- mode SC 70Km
The Gigabit ports are set by factory as AUTO by default but can be configured as per the convenience using the MNS-6K management firmware.
2.2.8Packet Prioritization, 802.1p QOS
Quality of Service means providing consistent predictable data delivery to
users from datagram paths that go all across a network. As a LAN device, the Magnum 6K8-Series can do its part to prevent any QOS degradation while it is handling Ethernet traffic through its ports and buffers.
The Magnum 6K8-Series switching hardware supports the IEEE 802.1p standard and fulfills its role in support of QOS, giving packet processing priority-to- priority tagged packets according to the 802.1p standard. In addition to hardware support for QOS, the MNS software (Rel3) supports two priority queues that can be shared across the eight levels of defined packet priorities for application-specific priority control by the user through software configuration settings.
www . GarrettCom . com
17
