Magnum | Installation and User Guide (04/07) | |
connector to hold it securely. |
|
|
Fig 3.6.2c |
|
|
Granddaughter Board placed |
|
|
in slot & secured with three |
|
|
5/16 standoff’s |
|
|
Step 3. The figure here |
|
|
illustrates the basic layout of an |
|
|
individual PM card. Each 6KPM |
|
|
card fits into the space provided on |
|
|
the main board. | Female latch connector | |
Fig. 3.6.2d Daughter Board, top view of
4 copper 10/100 ports
Fig 3.6.2e Daughter Board shown upside down with two male latch connectors
Step 4. Hold the daughter board with both hands at the end and insert the 6KPMV module inside the front faceplate slot carefully. Then align the two cream color-
latching connectors (male) placed at the bottom of the daughter board with the other female connector placed on the Granddaughter and main board. As shown below in Fig. 3.6.2f.
Fig. 3.6.2f Magnum 6KPM daughter board aligned with the bottom latch connector after inserted properly in front plate slot
Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then
www . GarrettCom . com
39
