GarrettCom 6K8 manual Www . GarrettCom . com

Magnum 6K8-Series Industrial Field Switch Installation and User Guide (04/07)

under indented side of the plate. Place two of the screws, came along the kit (#10-32 x ¼ Phillip Flat head screws with undercut) onto the indented side and screw tight the assembly as shown in Fig 2a.

Note: Make sure the screws must have the 5lbs/in torque minimum.

a. The Din-Rail clip must be on top, while positioning the clip as shown in Fig. 2b with arrow mark.

Fig. 2a: 10-32 Screws on indented side Fig. 2b: Din-Rail assembly w/plate applied to mount the Din-Rail assembly underneath.

5.Remount the Din-Rail assembled plate onto the Magnum 6K8, using the 4-40 screws.

Note: Torque 5lb/in max. on the 4-40 screws while tightening the screws.

The final Din-Rail assembly mounted on the Magnum 6K8 is shown below on Fig. 3

www . GarrettCom . com

32